Remote ATS Monitoring Systems Series 300 and Series 7000

 Accessories

Communications                      5200 Power Manager                  SiteWeb^tm              PowerQuest VPi  

Serial Module 5110 (Acc 72A) is used to allow local or remote communications with ASCO PowerQuest^® or SITEWEB^TM communication products. The module is used to connect the Series 300 and ASCO Remote Annunciators to the serial network via an RS-485 interface. The module has two port connectors used for ATS and Standalone Power Manager connectivity. The serial connection is accomplished from a 5 pin terminal header/socket block. The module is designed to communicate with up to 32 devices.

Monitor ASCO 7000 Series, Series 300 and 900 Automatic Transfer Switches (ATS), Power Manager and Remote Annunciator with the ASCO Connectivity Module that is designed to connect to standard Ethernet TCP/IP networks with a standard 10baseT (RJ-45) connector. The Connectivity module has built in, customized web pages for each type of device that load automatically to a standard web browser. No special software or programming is required at the computer.

The connectivity module is designed to support up to 8 clients simultaneously and it can even monitor many third party devices connected by an Ethernet LAN.

The ASCO Connectivity Module can also be used with ASCO PowerQuest^® and SiteWeb^TM.

The ASCO Telephone Interface Module (TIM) allows users to dial directly into their ASCO communications network for monitoring and/or control. The TIM connects to the ASCO communications network via RS-485 and the phone port connects directly into an analog phone jack. Also, the TIM has an RS-232 connector which allows the TIM to be used as the dialing modem.