<< Previous Next >>
 Winco Logo  PSS60-3 Phase
Enlarge Image(s) Email This Item To A Friend
 Packaged Standby Series, 60 kW (75 kVA) 60 Hz, SKU WIRE-060T309, Model PSS60-3 Phase  WIRE-060T309 (4107)
 GM 5.7L, three phase, LP/NG fueled, liquid cooled, 1800 RPM, electric start, Tier 1 Category: Home/Commercial   Status: New
In Stock Ship Via List Price You Save Our Price Qty  Add to Cart
Yes FEDEX Ground Freight 25,320.00 3,798.00 $21,522.00

Instructions and Notes: Proudly made in the USA! Call PowerPixie at 707 542-2224 today.
<-- To get a Freight Estimate, select the options and quantity below and CLICK this button. This product sold on GSA Contract: GS-07F-5964R
 Product Prices & Options   Select options for this product using the drop down windows. Prices will update immediately. Check here to purchase option only
GenSet Voltages @ 60 Hertz
GenSet Voltages @ 50 Hertz
Fuel
Remove Enclosure
Circuit Breakers
Fuel Conversion Kits
Fuel Filters
Battery Heater
ASCO Automatic & Manual Transfer Switch, Enclosed, Lt Duty, 185 Series
ASCO Automatic Transfer Switch, Enclosed, 300 Series 3ATS / 3NTS
ASCO 300 Series Enclosure
Included Equipment: Generator engine and alternator on welded steel frame base & cover mount platform, oil drain cock, mechanical governor, residential muffler (enclosed models), industrial muffler (open models), spring isolators, 12 volt electric starter, air filter, radiator (liquid cooled), blower fan and guards, battery tray, battery cables, owners manual and warranty. Batteries are not included. Other options are NOT included please purchase the options from the option lists.
    
>>> To find the specifications on this product including engine/alternator data, cooling, RPM, emissions, HP, Cylinders, displacement, amperages, mount details, tank sizes, fuel consumption and run times, tank run time calculator, dimensions, three phase to single phase conversion, 50 hz conversions, de-rate calculations, warranty, startup requirements, receptacles and more, CLICK on the OPEN SPECIFICATION WINDOW button below.
 Detailed Description
SKU WIRE-060T309:  Home/Commercial SKU WIRE-060T309
The Winco Model PSS60-3 Phase is a Packaged Standby Series generator with 60 kW (75 kVA) 60 Hz, of maximum output. These industrial generators are suitable for prime power and standby use. When you need the dependability of an industrial grade generator, with all the features you need, the Packaged Standby Series is for you. Available in several models, these models are competitively priced to deliver the performance and value found only on more expensive competitors models.

Winco generators are designed for many applications where power is needed. Winco generators are manufactured to commercial specifications using the latest manufacturing technologies. All models are built with the quality and reliability you would expect from a leading generator manufacturer.

The brushless alternator used on this model is manufactured to exacting specifications using the latest mass production methods. Winco generators use technology to control the voltage with a voltage variation less than 3% throughout the entire power range. That means you can use this generator with computers and sensitive electronics, safely, with no sacrifice in performance.

This model features a premium GM model 5.7L, 102 HP, LP/NG fueled, liquid cooled engine with electric start. This model runs at 1800 RPM and generates 60 kW (75 kVA) 60 Hz,of Standby (emergency or maximum) power and 54 kW prime (continuous) power at a primary voltage of 277/480 VAC, three phase, 60 Hertz, with 5% voltage accuracy. Single phase models are available as 120/240 VAC. Three phase models are available as 120/240, 120/208 or 277/480 VAC. If 50 Hz models are available they would be built as a special order. For 50 Hz voltage and amperage ratings, click on the Open Specification Window and then check the 50 Hz check box. This model has economical fuel use of 6.5 gallons at 1/2 load. Running time is over 15.4 hours on a typical tank. See Fuel Tanks below.
 
Warranty: The price includes a factory warranty of 12 months

Dimensions: Enclosed dimensions are 93.5" Long X 40" Wide X 47" High. Enclosed weight is 2383 lbs. Enclosed quietness is 74 db at 7 meters.

Enclosures: Weather and sound proof enclosures (if available), are built using steel panels and locking doors on a modular structural base frame. Sound enclosures include a rock-wool layer of insulation, which complies with the prevailing regulations and accomplishes the sound attenuating elements. Most enclosures include hot ambient air extraction fan. Select an enclosure from the Product Options windows, if available.

Fuel Tanks: No tanks are provided for NG/LP generators. If you need a propane tank, contact your local propane provider.

Trailers: Many industrial generators may be mounted on trailers. Generally, NG/LP units are not mounted on trailers except for units built for the oil and gas industry. Generators for the Oil and Gas industry are designed especially for use in rugged conditions. See Prime Power, Fracking and Oil Field Generators on our website at this link ->. Prime, Fracking & OIl Field Generators. If you want to use a stationary GenSet on a trailer you need to determine the right trailer to use. Use the following formula: GenSet weight plus Tank weight plus Fuel weight (Diesel is 7.2 lbs. per gallon), plus Other Equipment weight equals Total Payload. Then select a trailer that has a payload of at least the Total Payload or more.If you need a diesel powered trailer mounted unit referred to as a "Rental Type" see this link ->. Industrial Diesel, 1 & 3 Phase Trailer Mounted. The trailer mounted units are specially designed to have tanks built into the trailer and have a lower center of gravity to prevent overturning on rough terrain

Transfer Switches: The automatic transfer switch monitors utility and generator power. When utility power fails or is unsatisfactory, the transfer switch control starts the generator set, checks the generator speed and voltage output and transfers the load to the generator set. When utility power is restored the transfer switch automatically transfers back to utility power. The generator is allowed to cool down for a short period and then shuts down. The system instantly resets itself and is ready for the next power interruption. No action is required by the user.

You must select a transfer switch that is the same size in amps (or larger) then your building service or sub-panel. The transfer switch must also be the same size in amps (or larger) than the maximum output of the generator you select. Example: If you have a 12 kW generator operating at 120 VAC single phase, (100 Amps) and a 200 amp building service you need a 200 Amp transfer switch or you must install a 100 Amp sub-panel. Transfer switches should be installed by a licensed electrician. For more information on transfer switches please see About Transfer Switches.

Select a transfer switch to go with your generator from the drop down option list on this page under Product Options. The transfer switches shown are compatible with this generator. If you need additional transfer switch poles, auxiliary contacts or communications features see ASCO Transfer Switches. For special needs, volume purchases and other questions, call your GeneratorJoe sales representative at 707 542-2224 for assistance. All ASCO switches are shipped FREE when you purchase the switch with a generator.

Other Requirements or Options and GSA: If you do not find the options you need in the drop down option windows above or if you have other requirements, please call us and tell us what you require. If your needed option is not available we have many other brands that may provide the options you need or we will have a generator custom made if necessary. Please contact us at (707) 542-2224 or write sales@generatorjoe.net. If you are a college or university, federal, state, county, city or government agency customer write to gsa@generatorjoe.net.

CLICK>. Open Specification Window on the blue bar immediately above to see detailed specifications on this product. A window will fold down.
In the opened specification window you can find conversions for metric measurements, single phase deration of three phase units, derating calculations for elevation and temperature as well as fuel consumption and total run time by tank size. Click the Open Specification Window button to see these utilities and additional information.
Accessories available for this model are shown in Product Options above. Select an option in the drop down windows and the price will be recalculated automatically.
Additional Information on this product is available on buttons and links at the bottom of this page.
Transfer Switches shown on in Product Options (above) are matched to this generator. For details about transfer switches go to the Additional Information below.

Please see our extensive educational area on the left side blue column of this screen under the Information sign.

General Notes: To convert cubic ft to gallons divide cubic ft by 36.4. There are 91,500 BTU's per gallon of propane.

Standard Features
Packaged Standby Series, 60 kW (75 kVA) 60 Hz, SKU WIRE-060T309, Model PSS60-3 Phase
Sound attenuated housingLow maintenanceEmissions compliant
Low oil protectionFloat battery chargerWarranty engine/generator 2 years/1year
Options Available
Packaged Standby Series, 60 kW (75 kVA) 60 Hz, SKU WIRE-060T309, Model PSS60-3 Phase
Automatic transfer switch
 
 Additional Information
Winco HistoryAbout Transfer SwitchesGenerator InformationGenerator Safety
Proper Generator OperationBasic Plug & Receptacle GuideWinco History

 ASCO Light Duty Transfer SwitchesASCO 300 Series Manual Transfer SwitchesASCO 4000 Series Bypass Transfer Switches 
GE Zenith Light Duty Transfer SwitchesGE Zenith ZTG Series Auto & Manual SwitchesGE Zenith ZTS Series Auto & Manual SwitchesGE Zenith ZTS Series Bypass Transfer Switches

To see a list of generators in each category CLICK on these links.
All Home/Commercial, GeneratorJoe, Gaseous, Single phase
All Home/Commercial, Winco, Gaseous, Single phase   ~~~   All Home/Commercial, Winco, Gaseous, Three phase
All Home/Commercial, 1098, Gaseous, Single phase
All Home/Commercial, Kubota, Diesel, Single phase   ~~~   All Home/Commercial, Kubota, Diesel, Three phase
All Home/Commercial, 1149, Gaseous, Single phase   ~~~   All Home/Commercial, 1149, Gaseous, Three phase
All Home/Commercial, 1085, Gaseous, Single phase   ~~~   All Home/Commercial, 1085, Gaseous, Three phase
All Home/Commercial, Gaseous

Call us for information or to order at 707 542-2224 (8 A.M. to 6 P.M. California, Pacific Time) or write sales@generatorjoe.net.

Notice: Specifications, features, controls and other data subject to change, substitution or modification without notice. Some data may be approximate. We recommend that you review the Product Details, Product Brochures and Warranty for this product. Manufacturers may require professional startup services to validate warranties. All equipment should be sized, installed, started and maintained by professionals or knowledgeable users. Sales of equipment subject to conditions of sale posted on the website at Policy & Warranties, subject to change without notice.

*If this product has downloadable files, you may need Adobe Acrobat Reader installed on your computer to open the files. If you do not have this software, you may download it free from Adobe at Get Adobe Reader


 
       
     
Sku Index        Site Index        Pictures