EPA Tier III
and BLM, Fish & Game and Forrest Service Compliant
GenSet.
Industrial/residential
muffler inside cabinet.
Rubber isolators
Secondary (on the
generator) regulator and gas shutoff relay inside
cabinet (natural gas and propane only)
60 gallon single wall diesel tank on diesel models.
Double wall available.
GSC300 control panel with
auto-start and all standard features, connections are
needed only for dry remote start/stop contacts (input),
and dry output status contacts (running /not running),
(output).
½” watertight flex connector to feed control
wires through frame.
Terminal strip for telemetry connections.
Unit can be started/stopped and status reported
remotely.
Alarms can be
transmitted remotely via telemetry.
Panel upgrade
available to transmit voltages, frequency, fluid
pressure and temperature.
30 Amp, 480 Volt 3 phase
connection lugs inside the cabinet. Wire connection must
accept
#8 XLP stranded. 3 power and one ground lug.
¾”
watertight flex connector to feed wire through
frame.
Gas connection to GenSet
with short nipple, ell and short brass nipple to accept
flexible ¾” flex gas line.
Air filter & oil filter
installed.
Low oil, high water temp
shutdowns installed.
Oil drain quick connect
outlet with fitting.
Lifting eye in center or
on corners to hoist unit with enclosure intact.
Battery cables, battery
hold-down and battery rack inside cabinet.
Cabinet side doors to be
lift off with concealed latches & locks. One set keys
per unit.
Control panel door should
be small with no glass and lock to match doors.
Engine paint color is
black. Exterior color is off white/gray.
No oil and anti-freeze to
be provided. Customer to fill.
Warning placards: Ground,
high voltage, automatic equipment may start at any time,
and other warning required are provided.
Enclosures:
Weather and sound
proof enclosure provided with this model are built using steel
panels and locking doors on
a modular structural base frame. Sound enclosures
include a rock-wool layer of insulation, which complies
with the prevailing
regulations and accomplishes the sound
attenuating elements. Most enclosures include hot
ambient air extraction fan. Select an enclosure from the
Enclosure/Cover Product Option window. For additional
enclosure information click on Enclosure Details in the
Additional Information area below.
Transfer
Switches:
The automatic transfer switch monitors utility and
generator power. When utility power fails or is
unsatisfactory, the transfer switch control starts the
generator set, checks the generator speed and voltage
output and transfers the load to the generator set. When
utility power is restored the transfer switch
automatically transfers back to utility power. The
generator is allowed to cool down for a short period and
then shuts down. The system instantly resets itself and
is ready for the next power interruption. No action is
required by the user.
You must select a transfer
switch that is the same size in amps (or larger) then
your building service or sub-panel. The transfer switch
must also be the same size in amps (or larger) than the
maximum output of the generator you select. Example: If
you have a 12 kW generator operating at 120 VAC single
phase,(100 Amps)
and a 200 amp building service you need a 200 Amp
transfer switch or you must install a 100 Amp sub-panel.
Transfer switches should be installed by a licensed
electrician. For more information on transfer switches
please see
About Transfer Switches.
Select a transfer switch
to go with your generator from the drop down option list
at the top of this page under Product Options.
The transfer switches shown are compatible with this
generator.
If you
need additional transfer switch poles, auxiliary
contacts or communications features,
ASCO Transfer Switches. For special needs,
volume purchases and other questions, call your
GeneratorJoe sales representative at 707 539-9003 for
assistance. All ASCO switches are shipped FREE when you
purchase the switch with a generator.
