Generac, Home/Commercial Generator, 130 kW, (163 kVA) 60 Hz,, LP/NG fueled, liquid cooled, three phase, Model QT13068C

This model features a premium Generac model V Type, 10 cylinder, 202 HP, LP/NG fueled, liquid cooled engine with electric start. 1.0 DN, This model runs at 1800 RPM and generates 130 kW (163 kVA) 60 Hz, of Standby (emergency or maximum) power and 117 kW prime (continuous) power at a primary voltage of 120/240 VAC, three phase, 60 Hertz, with 0.25% voltage accuracy. In the opened specification window you can find conversions for metric measurements, single phase deration of three phase units, derating calculations for elevation and temperature as well as fuel consumption and total run time by tank size. Click the Open Specification Window button to see these utilities and additional information.

Enclosed dimensions are 116" Long X 37" Wide X 55" High. Enclosed weight is 2699 lbs. Enclosed quietness is 75 db at 7 meters.

This product has a factory warranty of 24 months Please see model notes below.

Transfer Switches: The automatic transfer switch monitors utility and generator power. When utility power fails or is unsatisfactory, the transfer switch control starts the generator set, checks the generator speed and voltage output and transfers the load to the generator set. When utility power is restored the transfer switch automatically transfers back to utility power. The generator is allowed to cool down for a short period and then shuts down. The system instantly resets itself and is ready for the next power interruption. No action is required by the user.

You must select a transfer switch that is the same size in amps (or larger) then your building service or sub-panel. The transfer switch must also be the same size in amps (or larger) than the maximum output of the generator you select. Example: If you have a 12 kW generator operating at 120 VAC single phase,(100 Amps) and a 200 amp building service you need a 200 Amp transfer switch or you must install a 100 Amp sub-panel. Transfer switches should be installed by a licensed electrician. For more information on transfer switches please see About Transfer Switches.

Select a transfer switch to go with your generator from the drop down option list at the top of this page under Product Options. The transfer switches shown are compatible with this generator. If you need additional transfer switch poles, auxiliary contacts or communications features, ASCO Transfer Switches. For special needs, volume purchases and other questions, call your GeneratorJoe sales representative at 707 539-9003 for assistance. All ASCO switches are shipped FREE when you purchase the switch with a generator.

Other Requirements or Options: If you do not find the options you need in the drop down option windows above or if you have other requirements, please call us and tell us what you require. If your needed option is not available we have many other brands that may provide the options you need or we will have a generator custom made if necessary. Please contact us at (707) 539-9003 or write sales@generatorjoe.net.

Please see our extensive educational area on the left side blue column of this screen under the Information sign.