Reliance Controls, Transfer Switches Generator, ,, , Model Panel/Link TRC-P Manual Transfer Switches

pixie PowerPixie™
generatorjoe GeneratorJoe™

Transfer Switches, Reliance Controls, TRC Pre-Wire Series, Surface/Flush Indoor & Surface Outdoor Manual Transfer Switches, 30 Amp to 125 Amp Utility and Generator. - Service entrance, main panel or sub-panel. - 12 to 20 branch circuit breakers., Reliance Controls Generator

Transfer Switches > RELIANCE CONTROLS

Panel/Link TRC-P Manual Transfer Switches, TRC Pre-Wire Series
Panel/Link TRC-P Manual Transfer Switches, TRC Pre-Wire Series

Panel/Link® TRC PRE-WIRED SERIES, INDOOR SURFACE OR FLUSH MOUNT AND OUTDOOR, MANUAL TRANSFER SWITCHES
Panel/Link® TRC PRE-WIRED SERIES, INDOOR SURFACE OR FLUSH MOUNT AND OUTDOOR, MANUAL TRANSFER SWITCHES

The Panel/Link® Series is available in twelve different series and hundreds of configurations. There are over 175 basic models and all models can be field-modified to create hundreds of other combinations. You can buy a transfer switch that meets your exacting requirements. This page displays the Panel/Link TRC Pre-Wired Series which includes Indoor Surface and Indoor Flush-Mount as well as Outdoor surface mount switches. All panels on this page are single phase, 60 hertz, UL rated.

The Panel/Link TRC Pre-Wired Series offers circuit breaker combinations of 30 Amp to 125 Amp utility and generator. The TRC is service entrance rated and may be used as a main panel or a sub-panel. The TRC features a heavy-duty copper bus. The TRC is available in indoor and outdoor enclosures and has provision for 12 to 20 branch circuit breakers. The Panel/Link TRC is available with and without power inlets or wattmeters. Interlinked circuit breakers keep the generator isolated from the utility at all time, even with the cover or dead-front removed.

These transfer switches are designed for fast installation in residential and commercial applications. Simply select the circuits needed in an emergency and connect them to the transfer panel.

Panel/Link transfer switches feature a rugged power-coated steel cabinet with six combination 1/2 inch and 3/4-inch knockouts, re-settable branch-circuit rated circuit breakers and non-defeatable (break-before-make) double-throw switches. Circuit breakers are included. Some models feature exclusive Reliance wattmeters with accuracy of ±3% throughout the entire range of the switch. See Knockout Patterns and Buss Details for additional information.

All Reliance Panel/Link® transfer panels are UL Listed for use with the following interchangeable branch circuit breakers: Siemens Type QP, QT, QPH, HQP, QPF, QPHF, QFP, QE, QEH; Square D Series HOM (100A Max.); Murray Type MP; Westinghouse Series BD, BR, BQ, GFC (All 100A Max.). Reliance will custom build the pre-wired TRC panel with any combination of breaker sizes. Call for details.

How to Determine Price and Buy: Look at all the models shown on this page and use the drop down windows to select the model you want. Then choose the additional options you want by selecting each option in the drop down windows. The price in the OUR PRICE box will update immediately as you add and subtract options. When you are finished configuring the switch click BUY and the description of that switch will be written to the shopping cart. You can also estimate freight by clicking on Calculate Freight after you put the item in the shopping cart. You can make as many configurations as you like at no charge. You will not be charged until you go thorough checkout.

For a display of typical installations click Installation Diagrams.

Reliance makes several series. For a summary of Reliance switches click Reliance Switches.

For step by step instructions on how to select a switch click Selection Steps. < We recommend that you start here.

For repair parts see the replacement option boxes on the Pro/Tran product page > Replacement Parts.

Please see Additional Information at the bottom of this page.

Suffix Description Wattmeters Inlet
AP1 Indoor with wattmeters and power inlet. Yes

Yes
BP1 Indoor with power inlet only, without wattmeters. No Yes
CP1 Indoor with wattmeters only, without power inlet. Yes No
DP1 Indoor Hardwire, without wattmeters or power inlet. No No
CRP1 Outdoor Hardwire, with wattmeters only. No power inlet. Yes No
DRP1 Outdoor Hardwire, without wattmeters or power inlet. No No
Model Number
Specifications Panel/Link TRC Pre-Wired
Indoor Surface
Outdoor Surface
(NEMA 3R)
(PK is the inlet box)
Max. Utility Input Amps
Max. Gen. Input Amps
 Watt Meters Included Gen. Power Inlet Included
Max. Branch Circuits
Max. Gen. Input - kW
TRC0603AP1
Use TRC0603CP1 & PK30
60
30
Yes
Yes
6/Single/15a
2/Single/20a
1/Double/20a
1/Double/30a
7.5
TRC0603BP1
Use TRC0603DP1 & PK30
60
30
No
Yes
7.5
TRC0603CP1
TRC0603CRP1
60
30
Yes
No
7.5
TRC0603DP1
TRC0603DRP1
60
30
No
No
7.5
TRC0605AP1
Use TRC0605CP1 & PK50
60
50
Yes
Yes
12.5
TRC0605BP1
Use TRC0605DP1 & PK50
60
50
No
Yes
12.5
TRC0605CP1
TRC0605CRP1
60
50
Yes
No
12.5
TRC0605DP1
TRC0605DRP1
60
50
No
Yes

12.5
TRC0606CP1 __ 60 60 Yes No 15
TRC0606DP1
TRC0606DRP1
60
60
No
No
15
TRC1003AP1 Use TRC1003CP1 & PK30 100 30 Yes Yes 7.5
TRC1003BP1 Use TRC1003DP1 & PK30 100 30 No Yes 7.5
TRC1003CP1 TRC1003CRP1 100 30 Yes No 7.5
TRC1003DP1 TRC1003DRP1 100 30 No No 7.5
TRC1005AP1 Use TRC1005CP1 & PK50 100 50 Yes Yes 12.5
TRC1005BP1 Use TRC1005DP1 & PK50 100 50 No Yes 12.5
TRC1005CP1 TRC1005CRP1 100 50 Yes No 12.5
TRC1005DP1 TRC1005DRP1 100 50 No No 12.5
TRC1006CP1 TRC1006CRP1 100 60 Yes No 15
TRC1006DP1 TRC1006DRP1 100 60 No No 15

Dimensions, indoor models, 21" H x 14.38" W x 3.94" D. - Dimensions, outdoor models, 22.25" H x 14.25" W x 4.5 D.

 

Accessories and Options for Manual Transfer Switches & Load Centers
 Inlet boxes, Inlet Panels, Plugs, Connectors, Power Cords & Wattmeters
Indoor and outdoor Power Inlet Boxes and Power Inlet Kits. Our inlet boxes are Raintite with gaskets. Power inlet kits are inlet boxes with breakers. All inlet boxes and other painted surfaces feature a rugged power-coated steel construction.
Power Inlet Boxes

GeneratorJoe! 		PB15 Inlet Box PB20 Inlet Box PB31 Inlet Box
  Click on pictures for larger view.
Model Number PB15 PB20 PB30 PB31 PB33 PB50 PB51
Max. Input Amps 15 20 30 30 30 50 50
For Use With Models 15114 All
20A, 250V Models		 All
30A, 250V Models		 30114A All
30A, 250V Models		 All
50A, 250V Models		 All
50A, 250V Models
Rating/Configuration 15A@125V
5-15		 20A@250V
L14-20		 30A@250V
L14-30		 30A@125V
L5-30		 30A@3ØY/208V
L21-30		 50A@125VAC 50A@250VAC
Inlet Yes Yes Yes Yes Yes Yes Yes
Circuit Breaker No No No No No No No
Max. Gen. Input kW 1.875 5 7.5 3.75 10.8 6.250 12.5
Connector 5-15 L14-20 L14-30 L5-30 LI21-30 3 Phase CS6365 CS6360
Dimensions, inches 6" H x 4" W x 2 5/8" D
Weight, lbs 2.5

Raintite NEMA 3R Power Inlet Boxes are designed for use with Pro/Tran transfer switches, Panel/Link manual transfer panels and generator-ready load centers. The power inlet box may be installed indoors or outdoors, in the area where the generator is being used. Using one of the four combination 1/2 inch and 3/4 inch knockouts (one on each side, bottom and back), the power inlet box can be wired directly to the transfer switch or panel. The exclusive patented design provides generous wiring space and facilitates rough-in. If you require a circuit breaker at the inlet box, use the PR Series inlet box that includes a circuit breaker. Select a box that matches the maximum amperage of the transfer switch.
 

PR Power Inlet Boxes
PR Power Inlet Panel Typical

NEMA Type 3R Enclosure
Model Number PR20 PR30 PR50
Description Power Inlet Panel Power Inlet Panel Power Inlet Panel
Max. Input Amps 20 30 50
For Use With Models All 20A, 250V Models All 30A, 250V Models All 50A, 250V Models
Rating/Configuration 20A@250V, L14-20 30A@250V, L14-30 50A@250V, C56365
Inlet Yes Yes Yes
Circuit Breaker Included Yes Yes Yes
Max. Gen. Input kW 5 7.5 12.5
Connector L14-20 L14-30 CS6365
Dimensions, inches 9" H x 6" W x 5" D
Weight, lbs 1
The PR Series Power Inlet Boxes includes a circuit breaker. Select a box that matches the maximum amperage of the transfer switch. Raintite NEMA 3R power inlet box designed for use with the Pro/Tran transfer switches and Panel/Link manual transfer panels and generator-ready load centers. The power inlet box may be installed indoors or outdoors, in the area where the generator is being used. Using one of the four combination 1/2 inch and 3/4 inch knockouts (one on each side, bottom and back), the power inlet box can be wired directly to the transfer switch or panel. The exclusive patented design provides generous wiring space and facilitates rough-in.
 

Power Inlet Kits - for use with Panel/Link®

Nobody gets the job done like GeneratorJoe!

PK 20 and 30 Open
Model Number PK20 PK30 PK50
Max. Input Amps 20 30 50
For Use With Models TRC, TRR, TTH, TTT, TTV & TWB TRC, TRR, TTH, TTT, TTV & TWB TRC, TRR, TTH, TTT, TTV & TWB
Rating/Configuration 20A@250V L14-20 30A@250V L14-30 50A@250V C56365
Circuit Breaker Included No No No
Max. Gen. Input kW 5 7.5 12.5
Dimensions, inches 3" H x 3" W x 3" D
Weight, lbs 1

Suitable for installation into a 2 1/2" knockout on any indoor or outdoor Panel/Link transfer panel or lead center, TRC series and larger. UL listed.
 
Power Cords: Power Cords are all rubber. This item is a vital connecting link between the generator and the transfer switch and/or the power inlet box. The 4-wire locking plug and connector match up with the power inlet on each transfer switch and power inlet box. Most portable generators are supplied with either a 20 Amp or 30 Amp 4-wire locking receptacle that accepts the locking plug on one end of the power cord. Power cords marked "USA" are not UL listed cords but are assembled with UL listed components.  UL listed cords have molded in ends and do not have USA in the number.
12 gauge cords are rated at 20 Amps for all 30 Amp inlet boxes and 30 transfer panels.
10 gauge cords are rated at 30 Amps for all 30 Amp inlet boxes and 30 transfer panels.
  6 gauge cords are rated at 50 Amps for all 50 Amp inlet boxes and 50 transfer panels.
The Cost: At first glace these cords look expensive, but if you go out and buy the plugs, wire and tools to make cable as professionally as these are done you will find that you spend at least the same amount of money and a lot of time. How do we know? We went out and did just that! Ours did not come out as nice and it took a lot of time and aggravation to make them. So just buy these Reliance Controls cords.
USA Power Cords

Nobody gets the job done like GeneratorJoe!

Power Cord Typical
Model Number USA PC2010 PC2020 PC2025 PC2040 PC2050 PC2075 PC20100 PC3010 PC3020 PC3040 PC3050 PC3075 PC30100 PC5010 PC5020 PC5030 PC5040 PC5050
Length Ft. 10 20 25 40 50 75 100 10 20 40 50 75 100 10 20 30 40 50
Amps 20 20 20 20 20 20 20 30 30 30 30 30 30 50 50 50 50 50
Voltage 125/250VAC
NEMA Configuration L14-20 L14-30 CS6364
Max Gen Input kW 5 7.5 12.5
Ship Weight, lbs 3.2 5.2 7.5 9.2 11.2 11.2 20.6 3.5 5 12 14 23 28 9 15 20.6 33.8 21
These heavy duty cord sets are designed for use with Reliance manual transfer switches, transfer panels and power inlet boxes. UL Listed.
 
Wattmeter Boxes: Wattmeter boxes come on many switches or you can add them to the front of existing switches if designed to take them. You can also add external wattmeters in a self contained box.

Watt Meter Boxes

GeneratorJoe! 		Watt Meter Box Typical
  Click on pictures for larger view.
Model Number MB75 MB125
Components Included/Rating (2) Watt Meters 3.75 kW each (2) Watt Meters 6.25 kW each
For Use With Models Panel/Link® Panel/Link®
Shipping Weight, lbs 2.5 7.5
Max. Gen. Input kW 2.5 12.5
The Reliance wattmeter boxes are ideal for use with any 125/250VAC installation where balancing the generator load is necessary for optimum performance. UL listed.
 
Plugs and Connectors: We offer a number of plugs and connectors to make your transfer switch or panel installation complete.
Male Plugs insert into 4-wire receptacle on your generator
Female Connectors insert into 4-wire power Inlet box and/or power inlet on your transfer switch or panel.
Female Receptacles mount on panels to accept a plug

Plugs and Connectors, Wiring Devices


GeneratorJoe!

L1420C Connector L1420P Plug L1430C Connector L1430P Plug LL550C Connector L550P Plug L1430R Receptacle
  Click on pictures for larger view.
Model Number L1420C L1420P L1430C L1430P LL550C LL550P L1420R L1430R
Max. Input Amps Connector Plug Connector Plug Connector Plug Receptacle
For Use With Models 20A@250V
L14-20C		 20A@250V
L14-20P		 30A@250V
L14-30C		 30A@250V
L14-30P		 50A@250V
CS6364		 50A@250V
CS6365		 20A@250V
L14-20R		 30A@250V
L14-30R
Inlet Included/
Rating/Configuration		 20216A, R20216B & PB20 All
20A, 250V Models		 30216A, R30216B, 30310A, R30310B & PB30 All
30A, 250V Models		 Panel/Link® Panel/Link® All
20A, 250V Models		 All
30A, 250V Model
Max. Gen. Input kW 5 5 7.5 7.5 12.5 12.5 5 7.5
All Reliance plugs, connectors and receptacles are made in the USA and listed by Underwriters Laboratories Inc.

How to Determine Price and Buy: Look at all the models shown on this page and use the drop down windows to select the model you want. Then choose the additional options you want by selecting each option in the drop down windows. The price in the OUR PRICE box will update immediately as you add and subtract options. When you are finished configuring the switch click BUY and the description of that switch will be written to the shopping cart. You can also estimate freight by clicking on Calculate Freight after you put the item in the shopping cart. You can make as many configurations as you like at no charge. You will not be charged until you go thorough checkout.

For a display of typical installations click Installation Diagrams.

Reliance makes several series. For a summary of Reliance switches click Reliance Switches.