PowerPixie™
Telephone: (707) 539-9003 - California - Pacific Time Zone - Mail: sales@generatorjoe.net
Cage 1U5V7 - TIN/EIN #943026355 - Duns #054590203 - GSA GS-07F-5964R - A small business owned by a service connected disabled veteran.
|
The Winco Model PSS60-3 Phase is a Packaged Standby Series generator with 60 kW (75 kVA) 60 Hz, of maximum output. Air cooled 3600 RPM residential/commercial generators are suitable for standby use. Water cooled 1800 RPM residential/commercial units are suitable for long term or prime power use. When you need a dependable home or commercial grade generator, with all the features you need, the Packaged Standby Series is for you. Available in several models, these models are competitively priced to deliver the performance and value you need. This model has a 4 wire control system (not related to the power wires). Most modern transfer switches have 2 wire controls, so you may need to buy a 4 wire to 2 wire conversion kit. The kit is shown on the options list as "Auto & Electric Start Kit". Unless you are certain that your transfer switch is 4 wire control then buy the conversion kit. Winco generators are designed for many applications where power is needed. Winco generators are manufactured to commercial specifications using the latest manufacturing technologies. All models are built with the quality and reliability you would expect from a leading generator manufacturer. brushless alternator used on this model are manufactured to exacting specifications using the latest mass production methods. Winco generators use technology to control the voltage with a voltage variation less than 3% throughout the entire power range. That means you can use this generator with computers and sensitive electronics, safely, with no sacrifice in performance. This model is UL-Approved. This model features a premium GM model 5.7L, 102 HP, LP/NG fueled, liquid cooled engine with electric start. This model runs at 1800 RPM and generates 60 kW (75 kVA) 60 Hz, of Standby (emergency or maximum) power and 54 kW prime (continuous) power at a primary voltage of 277/480 VAC, three phase, 60 Hertz, with 5% voltage accuracy. Other voltages available are shown in the opened Specifications Window (Click the Open Specification Window button). 50 Hz models are available as a special order. To see 50 Hz amperages click on the 50 Hz box in the opened Specification Window. In the opened specification window you can find conversions for metric measurements, single phase deration of three phase units, derating calculations for elevation and temperature as well as fuel consumption and total run time by tank size. Click the Open Specification Window button to see these utilities and additional information. Enclosed dimensions are 93.5" Long X 40" Wide X 47" High. Enclosed weight is 2383 lbs. Enclosed quietness is 74 db at 7 meters. This product has a factory warranty of 12 months Please see model notes below. Transfer Switches:The automatic transfer switch monitors utility and generator power. When utility power fails or is unsatisfactory, the transfer switch control starts the generator set, checks the generator speed and voltage output and transfers the load to the generator set. When utility power is restored the transfer switch automatically transfers back to utility power. The generator is allowed to cool down for a short period and then shuts down. The system instantly resets itself and is ready for the next power interruption. No action is required by the user.
You must select a transfer switch that is the same size in amps (or larger) then your building service or sub-panel. The transfer switch must also be the same size in amps (or larger) than the maximum output of the generator you select. Example: If you have a 12 kW generator operating at 120 VAC single phase,(100 Amps) and a 200 amp building service you need a 200 Amp transfer switch or you must install a 100 Amp sub-panel. Transfer switches should be installed by a licensed electrician. For more information on transfer switches please see About Transfer Switches. Select a transfer switch to go with your generator from the drop down option list at the top of this page under Product Options. The transfer switches shown are compatible with this generator. If you need additional transfer switch poles, auxiliary contacts or communications features, ASCO Transfer Switches. For special needs, volume purchases and other questions, call your GeneratorJoe sales representative at 707 539-9003 for assistance. All ASCO switches are shipped FREE when you purchase the switch with a generator. Other Requirements or Options:If you do not find the options you need in the drop down option windows above or if you have other requirements, please call us and tell us what you require. If your needed option is not available we have many other brands that may provide the options you need or we will have a generator custom made if necessary. Please contact us at (707) 539-9003 or write sales@generatorjoe.net.
Please see our extensive educational area on the left side blue column of this screen under the Information sign.
|
Included Equipment: Generator engine and alternator on welded steel frame base & cover mount platform, oil drain cock, mechanical governor, residential muffler (enclosed models), industrial muffler (open models), spring isolators, 12 volt electric starter, air filter, radiator (liquid cooled), blower fan and guards, battery tray, battery cables, owners manual and warranty. Batteries are not included. Other options are NOT included please purchase the options from the option lists.
| Packaged Standby Series, 60 kW (75 kVA) 60 Hz, SKU WIRE-060T309, Model PSS60-3 Phase | Sound attenuated housing | Low maintenance |
| Emissions compliant | Low oil protection | Float battery charger |
| Warranty engine/generator 2 years/1year | ||
| Packaged Standby Series, 60 kW (75 kVA) 60 Hz, SKU WIRE-060T309, Model PSS60-3 Phase | ||
| Automatic transfer switch | ||
