|
SITEWEBTM
is a client-server application requiring no software to be installed on
the client computer. When combined with the ASCO Communications
Interface Modules (Acc 72A, Acc 72E), the ASCO 5500 Series Thin Web
Server and the ASCO 5200 Series Power Manager, as shown above, it
provides the most comprehensive Intranet and Internet communications
system for the monitoring and control of power transfer switches and
engine generators located in your emergency or standby power
distribution system.
The
SITEWEBTM
communication system allows multiple client access, from local or remote
locations, and provides for the monitoring of up to 64 power transfer
switches and eight engine generators. In addition, automatic paging is
provided for all alarm signals. |
| |
 |
|
|
 |
|
Feature |
|
Thin Web Server
with
|
Series 5150
Connectivity Module |
| Quantity of
Monitored/Controlled Power Transfer Switches per LAN |
32 |
64 |
1024+
|
| Number of
Monitored/Controlled Gensets |
4 |
8 |
1024+
|
|
Control &
Monitoring Capability
|
Yes
|
Yes
|
No
|
|
Embedded Web
Pages
|
No
|
Yes
|
Yes
|
|
Ethernet Network
Compatible
|
Yes
|
Yes
|
Yes
|
|
Monitor Multiple
Protocols & Baud Rates
(ASCO I, ASCO II, Modbus)
|
No
|
No
|
Yes
|
| Monitor Multiple
Sites |
Dial-Up |
Internet |
Intranet
|
| Multiple Client
Access |
No |
Up to 8 |
Up to 8
|
| Client Software
Required |
Yes |
Internet Explorer |
Internet
Explorer
|
|
Monitors
Dissimilar ASCO Controllers on Common LAN
|
No
|
No
|
Yes
|
|
Communicates
with ASCO Remote Annunciators
|
No
|
No
|
Yes
|
| E-mail / Paging
Alarms |
No |
Yes |
No
|
|
Historical
Trending Option Alarms
|
No
|
Yes
|
No
|
|
|
5500 Series Thin Web
Server (for use with SITEWEBTM
Products) The
ASCO Thin Web Server allows you to monitor and control transfer switches
and engine generators anytime over the Internet or an Intranet from
anywhere in the world. It also transmits a page message that an alarm
has occurred with one or more of the transfer switches. Plus, this is
possible from your home computer or anywhere that has Internet service,
using the ASCO Thin Web Server single-board computer with its embedded
SITEWEBTM
HTML web pages. |
 |
Communication Interface
Modules ( Acc 72A)
Serial
Module 5110 (Acc 72A) is used to allow local or remote communications
with ASCO PowerQuest® or
SITEWEBTM
communication products. The module is used to connect the Series 300 and
ASCO Remote Annunciators to the serial network via an RS-485 interface.
The module has two port connectors used for ATS and Standalone Power
Manager connectivity. The serial connection is accomplished from a 5 pin
terminal header/socket block. The module is designed to communicate with
up to 32 devices.
|
Serial Module 72A |
|
Communication Interface
Modules ( Acc 72E)
Connectivity Module 5151
(Acc 72E) is used to bring several different serial devices that
communicate at different baud rates and with different protocols to a
common Ethernet media. The module is used to connect Series 300 and ASCO
Remote Annunciators to the standard Ethernet TCP/IP network with
standard 10Base T (RJ-45) connector. The module has been built in
customized JAVATM applets (program applications for an
internet browser) for each monitored device that loads automatically to
a standard Web Browser.
The module is designed to
communicate with up to 8 clients such as Web applications (web pages),
PowerQuest®,
or third party Modbus® devices simultaneously over and
Ethernet connection.
|
Connectivity Module 72E |
|